Newest Red PCB KESS V5.017 Testing Reported by Customers

2017 New Generation KESS V2 5.017 With Red PCB was the bestselling ECU Chip Tuning Tools for reading and writting ECU via obdii port and for the time being,the Red kess 5.017 was super hot in the marketplace and big welcomed by tuners.

Online EU Red PCB KESS V5.017 received many good feedbacks for its top quality,stable performance and appealling functions as well as multi vehicles supported at a cheap affordable price.

And following was the 100% working tested report by autocardiag.com customers

Red EU KESS V5.017 Function tested reported

For Multi-cars and trucks,no year limited---tested OK ( Can supports online 140+ protocols without tokens limited ).

Online operation supported---tested Yes ! (dont need disconnect network when using).

No tokens Limited---Yes !

Multi-Languages available---yes ! (Easily to pick up from menu)/

Easy to use---read and write ECU via OBD2 port directly, no need disassemble ECU from the car.

Performance tested Reporte ---stable !

PCB Board Tested---Top quality,using imported Japanese Murata filter NFE61PT472C1H9L .

If you hang around forum or by google,you will find there are lots of Red KESS FW5.017 Ksuite 2.23 good feedbacks, so,if you are looking for a ECU Flash tools,i will strongly recommend you buy Red PCB KESS V5.017 and now cheapest price for quality Red kess is available at www.autocardiag.com,only $109USD +DHL Shipping,you can check more below

24hours customer service

E-mail:autocardiag@gmail.com
Skype:AutoDiag
Whatsapp:86-13667154167

Red PCB KESS 5.017 vs Fgtech FW0475 vs XPROG 5.70

2nd Red PCB KESS V2 5.017 EU,FGTech V54 0475 and XPROG 5.70 are most popular and well-known ECU Programmer tools in the marketplace. And today,this article will present a comparison between Online EU Red PCB KESS 5.017, Fgtech 0475 and XPROG 5.70 ECU Programmer,i belive,it will help tuners better pick up right tools for cars.

The Hottest ECU Programmer : Red KESS V5.017 EU Version

Red KESS FW5.017 is the best recommended ECU Flash tool for flash ecus via obdii port. Red KESS 5.017 used 2nd red pcb board which added a buzzler to make it more stable to use and kess 5.017 with red pcb can support online 140+ protocols without tokens limited,and kess 5.017 red pcb supports online operation.New KESS V5.017 with a newer fashionable look,used LPC2478 NXP Chip + Newer sd card + 3D Sticker to provide a stable ECU Programming and the price is cheap affordable too.

 The Most Costive ECU Programmer :  0475 FGTech Galletto V54 Master

Newest 0475 FGTech was based on FGTech Galletto 4 V0386,but added new functions,and works better , faster and more stable than old versions,is the newest generation ECU Programmer for all cars , trucks , motorcycles,Marine,BDM MPCxx, BDM Boot Mode,checksum.FGTECH FW0475 ECU Progreammer can commuciate via OBD II and BDM, supports online operation,without tokens limited and so on. In all,2017 New FGTech Galletto 4 FW4075 will be one of ideal ECU Flasher tool for tuners.

 The Popular ECU Programmer : Newest XPROG 5.70 Box ECU Programmer

XPROG 5.70 Box ECU Programmer With USB Dongle is one of popular tool for multi cars, it was connected by Chips board,No operation system limitation and supports multi-functions.

Red PCB KESS 5.017 vs Fgtech FW0475 vs XPROG 5.70

The Same

1. ECU Programmer For Multi cars.
2. Need to close virus before using.
3. Dont support online operation.
4. With latest software and hardware.

The Different

1. Different Connection : Red PCB KESS 5.017 is connected via OBDII port,the Fgtech 0475 is for BDM and OBDII, while the XPROG 5.70 Box ECU Programmer is by Chips board connection.

2. Supported Vehilces : Fgtech is For all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum,KESS 5.017 Red is mainly for cars, while the XPROG 5.70 is for cars.

3.In terms of Price : Xpro5.7 > Red PCB KESS 5.017 >Fgtech 0475

So,if you are looking for a ECU Chip Tuning Tool For OBDII using,then red pcb kess 5.017 is your choice,but if you are looking for a costive and cheaper ecu flasher tool,then you can give fgtech fw0475 a shot. But if you are looking for a ECU Programmer for multi cars that connected by chip boards,then buy popular XPRO 5.7 will be ideal optional.

Xmas Shopping : Red PCB KESS 5.017 EU For Sale,$113USD !

Xmas Special Deals For Online EU Red PCB KESS V2 5.017 Master Version,5% OFF + $6USD Coupon is available at autocardiag.com,right now, buy Red PCB KESS V5.017 , just need $113USD by free dhl shipping here :  Red PCB KESS 5.017 Europe Version.

$6.5USD Coupon : 100CUT6.
Available Time : 9th,Dec,2017 to 7th,Jan,2018.

 Note : the 6USD Coupon can be applied to any products at www.autocardiag.com, as long as your orders up to $100USD,check more autocardiag.com xmas coupon below

Any questions or doubles about Autocardiag.com Xmas Special Deals can directly contact us by following method

E-mail:Autocardiag@gmail.com
Skype:AutoDiag
Whatsapp:86-13667154167

KTAG KESS KTM100 Full Set BDM Probe Adapter Buyer's Guide !

BDM Probe Adapters is the newest introducted product for KTAG KESS KTM Dimsporting.And Full Set BDM Probe Adapters Chips first batch has arrived and full in stock at autocardiag.com ,right now,you can buy BDM Adapters right here : KTAG KESS BDM Probe Adapter Full Set For Sale.

And following is a buyer's guide for BDM Probe Adapters Full Set

1. This is a full set with 21 adapters,see pix show

2. This tool suit for Red PCB KESS V2 5.017 + Red PCB KTAG 7.020 and KTM100 and so on ECU Chip Tuning Tools For Disporting Job.

3. 5% OFF promation for KTAG KESS KTM100 Full Set BDM Probe Adapters is available at autocardiag.com.

KESS KTAG BDM Probe With 22 Adapters FAQs Guide

Q1 : What is the adapters in the package included ?

A1 : BDM Probe Adapters Introduction

1 14AM00T01M Bosch
2 14AM00T02M Delphi DCM
3 14AM00T03M Bootloader ST10xx
4 14P600KT04 Infineon Tricore EDC/MED17
5 14AM00T05M Marelli MPC55xx JTAG
6 14AM00T06M Delphi MPC55xx JTAG
7 14AM00T07M Denso CN1 Boot
8 14AM00T08M Denso CN2 Boot
9 14AM00T09M Denso CN3 Boot
10 14AM00T10M Denso CN1 AUD
11 14AM00T11M Denso CN2 AUD
12 14AM00T00M Delphi DCI
13 14AM00TBAS Base Adapter 1.27
14 14AM00T14M NexusEFI T6 Lotus
15 14AM00TB02 Magneti Marelli BDM insert
16 14AM00TB01 Siemens BDM insert
17 14AM00TB03 EDC7 BDM insert
18 14AM00T18M Magneti Marelli MPC/SPC56xx
19 14AM00T13M Nexus MPC5xx TRW ECU
20 VAG 1.6tdi - Siemens-Continental PCR2.1
21 14AM00T15M Toyota NEC76F-20
22 14AM00T16M Toyota NEC76F-26

Q2 : What's the good reasons to buy BDM Probe Adapters ?

A2 : It is a neccessory product for ECU Chip Tuning Tools and can be used for KESS,KTAG,KTM and so on diporting and the package contains 22 different adapters to meet different requirements and the price is cheap affordable too.

Q3 : Where to buy KTAG KESS KTM Dimsport BDM probe adapters full set online ?

A3 : Now, autocardiag.com has BDM Probe 22 Adapters full in stock at a cheap affordable price.

Q4 : Is it easy to use ?

A4 : yeah,it is easy to use with a great quality.

I will keep update more KTAG KESS KTM100 Full Set BDM Probe Adapter FAQs Guide future,so pls pay attention to this blog to get up to date informations.

Red PCB KTAG V7.020 EU Pros and Cons !

New Design KTAG 7.020 Master With Red PCB Launched and Presented Public. The Red PCB KTAG V7.020 inherited almost all features and functions of Green PCB K-TAG KTAG 7.020 ,but with new look and better performance.

Online EU Red PCB KTAG 7.020 is the new introducted ECU Flash Tool For Cars,Trucks,Boats,Heavy Duty and so on online all protocols without tokens limited.

And today,this article will share a buyer's guide on Red PCB KTAG V7.020 EU Pros and Cons ,maybe it will be better help you know Red KTAG FW7.020 Ksuite 2.23

The Pros

1. Based on famous Green PCB KTAG 7.020,shared almost all features of KTAG V7.020,but with better performance and functions. New Red PCB KTAG 7.020 Master used best PCB by far,see pix show

2.Supports online full protocols ,fully activated,without tokens limited For Trucks, Boat,Heavy Duty and so on.

3.The package comes with GPT Cable to support GPT functions.

4. Online Operation supported and Multi-Languages supported.

5. Fashionable appearance,with original datebases.

6. Has been tested for many times before sending out.

7. New introducted ECU Flash Tool is perfect for all the ECU that need to be programmed with Jtag, BDM and Boot protocols(tricore and ST10).

The Cons

1. Not original one,but with original database,100% workable.
2. New introducted ECU Programmer,though it is top quality with highly peformance, yet, still more customer's feedback. 3.Disporting ECU from vehicle is needed,but not too hard,you can choose a ECU Programming Adapter : LED BDM Frame With 4 Probes together to simple your job.

In all, EU Red PCB KTAG 7.020 is a ideal ECU Programmer tool for all the ECU that need to be programmed with Jtag, BDM and Boot protocols(tricore and ST10),it has a beautiful and fashionable outer look ,used best and most stable PCB and the price is cheap affordable too.

Red PCB KESS 5.017 + KTAG 7.020 Installation FAQs Help Guide !

Online EU Red KESS 5.017 Ksuite 2.23 is the best ECU Programmer For OBDII using,while the ktag v7.020 is the best tool for all the ECU that need to be programmed with Jtag, BDM and Boot protocols (tricore and ST10). And currently,more and more users are tender to buy Red KESS 5.017 EU + KTAG V7.020 Master together to support more vehicles.

Now 11.11 Big Promation For Red KESS FW5.017 + KTAG V7.020 is available at buyobdii.com, you can buy right here : Red PCB KESS 5.017 EU +KTAG V7.020

And following are some Installation FAQs Guide about red kess v5.017 eu + ktag 7.020 master

1. If you buy Red KESS FW5.017 + KTAG 7.020 together,then pls dont install kess ,ktag software in one PC,otherwise,you will met some problems.

2.If you meet Installation Greyed Out Problems,then you can follow these steps

Step 1 : Pls clean your computer first,uninstall all old and before installed kess,Kag software

Step 2 : Re-start your computer

Step 3 : Put CD in , and install it without internet, (some customer install is gray,because the pc ip is locked,by original , maybe you used original tools on it before,or maybe you update kess/ltag before…..)

Step 4 : Connect with kess,ktag.
Note : kess and ktag cannot install in 1 computer

Step 5 : Just Follow the system guide to process operation,then your problem will be fixed.

Please try it,any problem,please feel free to contact us!

E-mail:buyobd@gmail.com
Skype:Marshall.obd2
Whatsapp:86-13476108995

Red PCB KESS V2 5.017 EU Honest Review !

Based on the success of the groundbreaking and popular green pcb kess 5.017, the team has now released one of the most spectacular KESS V2 Master,called : Red PCB KESS 5.017 available today.

As we said above, the Red KESS V5.017 EU was updated from KESS FW5.017 blue, shared almost all features of Green PCB KESS V2 5.017 Master Version,yet,at the same time,it also made some changes.

So,here,the blog will share a KESS V2 5.017 With Red PCB Honest Review to give tuners more details about Red KESS 5.017.

Red PCB KESS 5.017 EU and PCB Looks

Just as we have seen, the Red KESS 5.017 was beautiful and has same look as the original one. And this is one of reasons to account for why Red kess 5.017 ksuite 2.23 was so hot and popular.

BUYOBDII Red PCB Kess v2 5.017 with full components :

More one buzzer
WFs = Infineon, BCR112 NPN Digital Transistor
27E = ON Semiconductor NUP2105LT1G
6DW = NXP BC817,215 NPN Bipolar Transistor
A6c = MMUN2113LT1G / MMUN2113LT3G
K5B = BC807-25-7-F PNP Bipolar Transistor
NFE61PT472C1H9L Murata

Red PCB KESS V2 5.017 EU Version Specification

Software Version : V2.23 (Newest)
Fireware Version : V5.017
Update : By link
Car Models : For Multi-cars and trucks,no year limited
Languages : English/ German/ Spanish/ Italian/ Portuguese/ French
Functions : Ecu Programming Tool
Connection : By OBD2.Read and write ECU via OBD2 port directly, no need disassemble ECU from the car, easy to use .
Support Protocol : OBD2,BOOT...

KESS V2 5.017 EU Red PCB Striking Features From Experience

1. Appealling Look.
2. Top quality with great reworked PCB.
3. Online operation supported,no tokens limited.
4. No reset button,no usb dongle.
5. Multi-languages supported.
6. Easy to use,perfect for OBDII programming.
7. Online 140+ protocols supported.
8. can work on any operation system.

Is Red KESS 5.017 EU Worthy to buy ?

From my testing, the answer was abosolutly sure ! If you are looking for a ECU Programmer,then buy Red PCB KESS 5.017 is the best choice for you,this toll has launched for ages,tested by many users,with a good reputation for its functions, stable performance as well as affordable price and this kit also looks beautiful.

Why KTAG V7.020 Master Better Than New KTAG 7.026 ?

Currently,KTAG 7.020 Master is the best ECU Programmer For all the ECU that need to be programmed with Jtag, BDM and Boot protocols(tricore and ST10).And the most popular KTAG FW7.020 was the KTAG 7.020 With GPT Cable,which can support GPT function and this ECU Flasher Tool has been tested by many users with a good reputation for its quality,performance,functions and so on.

While,as you maybe know, the new generation ktag master tool,called KTAG 7.026 Ksuite 2.25 incoming. KTAG FW7.026 with socketed NXP,and have MCU for change. See the KTAG 7.026 master first images

Then what is the different between the new KTAG 7.026 and KTAG 7.020 ?

 1. The KTAG FW7.026 With 30 tokens limited,while the KTAG FW7.020 Without tokens limited.

2.KTAG 7.020 Master Supports online operation or online updating,yet,the KTAG 7.026 software was blocked.

3.ktag firmware 7.026 have MCU for change, ktag firmware 7.020 not reset CFG, KTAG .

4.KTAG V7.020 Master Version has launched for ages,tested by many users with a good reputation ,while the KTAG 7.026 was unavailable and currently,nobody knew when it will be available .

5.New generation KTAG FW7.026 can support more vehicles.

7. 7.020 KTAG Master Version has been tested by many users with a good reputation and the price is cheap affordable,while the KTAG 7.026 Master was still under developing.

So,IMO,KTAG 7.020 Master is better than KTAG 7.026 in following

1. tested by many users with a good reputation.
2. No tokens limited.
3. Online operation supported.
4. Full activated for all online protocols.

In my opinion,if you are looking for a high quality ECU Programmer,then you can give KTAG 7.020 Master Version a shot,it will never fail to you in terms of features, price,functions as well as performance.

Where Get 2017 New ETKA 8 [Germany + International] Software Germany ?

ETKA 8.0 is the latest software for ETKA Electronic Parts Catalogue .ETKA 8 was updated from ETKA 7.5 Plus,it is also full version for VW/SEAT/SKODA/AUDI,but compared to ETKA 7.5 Plus,the ETKA 8.0 Software will allow users to install native or virtual [VM] on every Windows 7/8/10 32Bit System.

If you are looking for ETKA 8.0 Electronic Parts Catalogue Germany,then you can reply on luck by googling or you can give buyobdii.com a shot,see here : ETKA 8 V2017 [Germany + International]

2017 New ETKA 8 Software Buyer Tips

1.Software is sent by Link,no CD,please notice it.

2..It can be installed Native only on 32Bit Systems, if you have a 64Bit System please use a Virtual Machine (e.g. VMWare) with an installed 32Bit System.

3.Installation requirements : Full Admin Rights,15GB free disk space,NET Framework 2.0 or 4.0, Deactivated Windows Defender / Anti-Virus & Deactivated Firewall,Index for fast file search .

Buy BMW ICOM Next or Buy VXDIAG A3 For BMW ?

Just as the title suggested,both BMW ICOM NEXT A+B+C and ALLscanner VXDIAG A3 can do coding and programming for BMW cars.Then Buy 2017 BMW ICOM Next or buy VXDIAG A3 ,which better ? Given to this questions,i will make a comparison between these two BMW tools,hope it will be useful.

BMW ICOM Next is the latest generation diagnostic head for MW,MINI,Rolls-Royce BMW-Model. ICOM NEXT was based on BMW ICOM A2,has all features of ICOM A2 but better than ICOM A2 and with many appealling features like : Gbit workshop LAN,backwards compatible,faster start-up times and high throughput,flexible OBD cable and so on and the price is cheap affordable too.

 VXDIAG A3 For BMW function & vehicle coverage = BMW ICOM + VAS 5054a + JLR SDD. It covers BMW, LAND ROVER & JAGUAR, VW also latest DOIP and perform diagnose, programming, coding etc. With newest software ISTA-D V40.01 ISTA-P V3.59 , SDD V148 & ODIS 4.0.

BMW ICOM Next vs VXDIAG A3

1.BMW ICOM Next is specially for MW,MINI,Rolls-Royce BMW-Model ,while the VXDIAG A3 not only supports BMW,but also LAND ROVER & JAGUAR, VW and so on.
2. BMW ICOM NEXT only supports USB connection,while the VXDIAG A3 For BMW has 3 ways of connection for diagnosis: USB, WIFI, and wired cable.
3. BMW VXDIAG A3 functions is powerful than ICOM NEXT For BMW.
4.VXDIAG A3 Programming Tool with HDD,the ICOM NEXT doesnt come with.
5.BMW Allscanner VXDIAG A3 price is a little expensive than VXDIAG A3.
So,if you wanna a multi-functions tool for coding/programming on BMW or other car models and dont care about price,then you can buy VXDIAG A3,it is super powerful and amazing. Otherwise,you can buy VXDIAG A3 For BMW, this is a amazing tool with appealling features at affordable price.

Looking For Master Online EU Red KESS V5.017 USA Cheap !

Building on the extremely popular and high-quality KESS V2 5.017 Master Version, the newest Red PCB KESS 5.017 currently was super hot in the marketplace and KESS V5.017 EU Red PCB was regarded as one of the must have ECU Chip Tuning Tools in 2017 for tuners.

Now Master Online EU Red KESS V2 5.017 first batch has arrived and full in stock at buyobdii.com with 10% off, now you can buy Red KESS 5.017 Ksuite 2.23,only $160USD + free dhl shipping right here :  Master Online EU Red KESS V5.017 USA

So,if you are in the marketplace for a top quality KESS 5.017 RED PCB  cheap,you can give www.buyobdii.com a shot,it will never fail to you,the kess v5.017 red pcb with many striking features like below

1.With best PCB board,reworked with original database


2. Better performance,function as well as more online protocols supported.
3. Online Operation Supported,No tokens limited and can work with virtual files.
4. Multi-Languages supported.
5.Perfect for OBD use,Read and write ECU via OBD2 port directly, no need disassemble ECU from the car, easy to use .
6.No reset button,no USB dongle,no tokens limited and has tested by many users as well as our technology department, 100% workable.

24hour Online Customer Service

E-mail:buyobd@gmail.com
Skype:Marshall.obd2
Whatsapp:86-13476108995

Why KESS V2 5.017 Red PCB Better Than KESS 5.017 Green PCB ?

Maybe as you have noticed,recently,a new KESS 5.017,called Red PCB Kess V5.017 Europe Version came into the marketplace. It was said the Red PCB KESS 5.017 Ksuite 2.23 with better quality than bestselling KESS V5.017 With Green PCB,is the perfect replacement for the green PCB KESS FW5.017. See pix show

The Newest KESS 5.017 Red PCB with new look and new reworked PCB to support online more protocols.

See the comparison between Red KESS V5.017 and Blue KESS 5.017

As we have talked above,the Red KESS V2 5.017 Europe Version is the updated version of kess 5.017,they shared many commons,yet the new version with better quality,more appealling appearance and can support more vehicles. Both of these reasons can account for why KESS V2 5.017 Master Red PCB was better.

See striking features of Master Online Red KESS V2 5.017 Europe Version

1.Newest generation,with improved features and functions.
2.decent quality and price,you can check cheap deal at http://www.buyobdii.com/ , only $159USD + DHL Shipping.
3.easy to use,Read and write ECU via OBD2 port directly, no need disassemble ECU from the car,100% working.
4.With original ori database.
5.Kess V2 5.017 can be used online,users dont need disconnect network when using.
6.Support Online Added 140 Protocol(cars,bikes,trucks)as well as fully open to all protocols
such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10 ,Really No tokens limited.
7.Launched for ages,tested by many users with a good reputation.
8.No reset button,no USB dongle.No any problem of old kess.No wake up error.
9.Multi-Languages Supported.
10.Full acativated for both cars,bikes,trucks
12.Faster reading file,no lock forever!!

$289USD Buy KESS V5.017 + KTAG V7.020,3% OFF + DHL Shipping !

Master Online KESS V2 5.017 + KTAG 7.020 ECU Programmer were bestselling ECU Chip tuning tools in 2017. As we knew, KESS FW5.017 is perfect for obdii using,while the KTAG FW7.020 Master is perfect for Jtag, BDM and Boot protocols (tricore and ST10). After all,KESS 5.017 Ksuite 2.23 cant support all vehicles via obd2 port,and there are still lots of cars ECU need to be disported  from cars,in this case, many tuners tend to buy KESS V2 5.017 Master Version + KTAG 7.020 Master together to support more vehicles. And now big promation for KESS FW5.017 + KTAG FW7.020 is available at BUYOBDII.com ,3% off + free dhl shipping,see best deal here : Buy KESS V5.017 + KTAG V7.020 For Sale.

About KESS 5.017 Ksuite 2.23

KESS V2 5.017 is the best key programmer for obdii using and kess with original database,unlimited tokens for both software and hardware,and also supports online operation and so on. KESS 5.017 china can support online 140+ protocols (bikes,cars,trucks--) and this tool also launched for ages,tested by many users,with a good reputation in quality,function as well as price.

About KTAG 7.020 Ksuite 2.23

KTAG FW7.020 Master is full activated for online all protocols,it can be used for bikes,cars,trucks,boats,hevy duty and so on.K-TAG KTAG 7.020 supports multi-languages,can operation online and has unlimited tokens for both software and hardware and the price is cheap too.What's more,our KTAG 7.020 with GPT Cable,this is the big different from ours with others in the marketplace.

 

Newest Version Fgtech Galletto V54 0475 Incoming With Testing Results Report

2017 Newest Fgtech Galletto 4 V54 Master 0475FW ECU Programmer will come out soon. Fgtech Galletto V54 0475 has been developed and now is being testing,i belive the team will release soon.

See Fgtech V54 0475 Software Preview

And according to our technology skillers testing, the FGTECH V54 0475 EURO will program cars,trucks and can support more newer vehicle models ,see the progress report below

"11/12
OBD driver SSangyong Delphy DCM3.7 Read/Write, Checksum
11/12
OBD driver for Ferrari 458 Italia MED9.6 Ecu Master and ECU Slave Read/Write, Checksum
10/12
OBD driver for Fiat/Alfa/Lancia Twinair/Multiair 8GMF and 8GSF Read/Write, Checksum
10/12
OBD driver for Mazda 5, Mazda 6 2.0 Diesel ECU RF8x Read/Write, Checksum
10/12
OBD driver for Mazda 5, Mazda 6 2.0 Diesel ECU RF7x Read/Write, Checksum
09/12
OBD driver for Simos 10.xx VAG 1.2 TSI Read/Write, Checksum
09/12
OBD driver for CRD 3.xx Mercedes 2200 CDI Read/Write, Checksum
09/12
Simos PCR2.1 VAG 1.6 TDI Unlock Boot Tool – Read/Write EEPROM
09/12
OBD driver Simos PCR2.1 VAG 1.6 TDI Read/Write, Checksum
08/12
RSA recognition Peugeot Bipper
08/12
RSA recognition Citroen Nemo
08/12
OBD driver Driver for writing Bosch EDC16C34/5 Peugeot Bipper Read/Write, Checksum
08/12
OBD drive Driver for writing Bosch EDC16C34/5 Citroen Nemo Read/Write, Checksum
07/12
OBD driver Delphi DCM3.5 for Tata Safari Read/Write, Checksum
07/12
Checksum recognition for DCM3.7 Ssangyong
07/12
Checksum recognition for DCM3.7 Opel and Saab
07/12
Checksum recognition for DCM3.7 Kia and Hyundai
07/12
Boot Visteon ST10F275 RX-TX Mode
07/12
Boot ME7.9.10 ST10F275 RX-TX Mode
06/12
Checksum recognition for Denso Subaru Tribeca
06/12
Boot Mitsubishi MH7203 Hyundai
06/12
Checksum recognition for Denso Nissan L200
06/12
Checksum recognition for Denso Nissan X-Trail
06/12
OBD driver Opel Simtec75 CAN Read/Write, Checksum
05/12
OBD driver Porsche SDI3 CAN Read/Write, Checksum
05/12
Corvette Utility CAN for change VIN, Code Align, Erase Errors
05/12
Corvette Utility VPN for change VIN, Code Align, Erase Errors
05/12
OBD driver Renault SID305 CAN Read/Write, Checksum
05/12
OBD driver Maserati ME9 CAN Read/Write, Checksum
04/12
Tool Boot Hitaci Phase 3
04/12
Tool Boot Hitaci Phase 2
04/12
OBD driver Fiat ME17.31 CAN Read/Write, Checksum
04/12
Boot Mitsubishi for L200 MH8102F
03/12
Boot Mitsubishi for Lancer EVO MH7202
03/12
Fiat MJ8DF CAN Serial Injectors
03/12
Fiat MJ8DF CAN Serial Injectors
02/12
OBD driver Fiat MJ8DF CAN Read/Write, Checksum
02/12
OBD driver Fiat MJ8DF K-line Read/Write, Checksum
02/12
OBD driver Mercedes Delphi CRD2.xx CAN Read/Write, Checksum
01/12
OBD driver Ford Delphi DCM3.5 CAN Read/Write, Checksum
01/12
OBD driver PSA Delphi DCM3.5 CAN Read/Write, Checksum
01/12
OBD driver VAG Simos 3xx Boot mode 29F400 C167 Read/Write, Checksum
12/11
OBD driver VAG Simos 9.1 Boot mode 29F400 C167 Read/Write, Checksum
12/11
OBD driver VAG Simos 7.1 Boot mode 29F400 C167 Read/Write, Checksum
12/11
OBD driver VAG Simos 33 K-line serial Read/Write, Checksum
12/11
OBD driver VAG Simos 32 K-line serial Read/Write, Checksum
12/11
OBD driver VAG Simos 3PG K-line serial Read/Write, Checksum
12/11
OBD driver VAG Simos 3PE K-line serial Read/Write, Checksum
12/11
OBD driver VAG Simos 3PD K-line serial Read/Write, Checksum
12/11
OBD driver VAG Simos 3PC K-line serial Read/Write, Checksum
12/11
OBD driver VAG Simos 3PA K-line serial Read/Write, Checksum
12/11
OBD driver VAG Simos 9.1 K-line Read/Write, Checksum
11/11
JTAG MPC55xx
10/11
New password Tricore Tprot V08-10
10/11
OBD driver Renault Valeo V40, Read/Write, Checksum
10/11
AUD Renesas
10/11
Boot Renesas"

So,let's just stay tuned patiently,i belive,later,there will be more and more updated news about Fgtech Galletto V54 0475.

How to Use Vpecker E4 Professional Diagnostic Tablet Program Universal Cars ?

Referred to Vpecker E4,i belive many tuners have known this new product.Yeah,the Vpecker-E4 is 2017 new introducted powerful diagnostic tool for extensive vehicle coverage for more than 78 US domestic, European, Asian, Australian and Chinese vehicles makes. Vpecker E4 Multi Functional Tablet Diagnostic Tool features upgradable firmware, multiple protection,interference and stability. Also with overall special functions like resetting, coding, programming, data replay, data analysis and so on.

And today,this aritcle will share a Vpecker E4 Android Tablet Diagnostic Tool User Guide on how to use Vpecker E4 to programmer cars via obd2 port,hope it will be useful.

Step 1 : Connect Vpecker E4 diagnostic tool with vehicle

Step 2 : Then you will come to IMMO Keys menu ,Select Opel->Agila(here i will take Opel cars for example)

Step 3 : then choose Year 2005-2007  like following pix show

Step 4 : Select Program Transponder Keys function,then the system will requires to enter 4-digit security pin code as pix displayed below

 Step 5 : After input pin code,then follow prompt to insert non-programmed transponder key....Start engine and then turn ignition OFF...Turn ignition to ON position.

Step6 : just follow the sytem guide,then you will finished the programming

This user method can be applied to other cars as well. Just as you have seen,it is super easy to use Vpecker-E4 Vpecker E4.

Shared by : http://www.buyobdii.com/

2017 Top and Best Locksmith Tools Recommended ?

SBB V46.02 Key Programmer and SKP1000 Tablet will be two obd2 locksmith tools recommended in the blog. Why Buy Slica V46.02 SBB Key Programmer or SKP-1000 ,i will give my explanation below one by one.

About SBB Key Programmer V46.02

SBB V46.02 can programm multi brands car keys in immobilizer and supports multi-languages. 2017 Newest Version V46.02 SBB Key Programmer received many good reviews for its great performance at cheap price.See SBB Key Programmer V46.02 striking features below

1.2017 New SBB V46.02 Add rs232 cable ,can support firmware update.
2.Supports Multi-Languages.
3. Coverage multi car models.
4.Software with full database containing all the most important vehicle makes.
5.easy to use,100% work and price is super cheap and affordable.

 About SKP1000 SKP-1000 Tablet Key Programmer

SKP1000 Key Programmer is a powerful diagnostic scanner for almost all cars in the world.SKP-1000 with 4'inch touch screen, mainly designed for auto Key programming. covers all functions of SuperOBD SKP-900 key programmer. SKP-1000 is a convenient device which can perform immobilizer,  EPB+ Oil/service Reset , and special function, integrates more application and service, such as Maintenance Database, remote assistant,and One Key Update etc.

 So,if you wanna buy a normal tool for multi car models with multi-languages supported at cheap price,then buy SBB V46.02 will be your choice and this tool has launched the marketplace for ages ,tested by many users,100% work. And SBB Silca 46.02 was updated from SBB V36.02,with better performance and function to use.

But if you are looking for a powerful and amazing tool for multi-functions and dont care much about price, then SKP-1000 Auto Key Programmer is for you .It is the perfect replacement version of SKP900 +CI600 Plus,can do auto key programming + Specifical functions and supports one key updating for both software and hardware,skp1000 was regarded as one of the must have tool for all locksmith.

X100 PAD2 Pro vs SKP1000,Which OBD2 Key Programmer Buy ?

X100 PAD2 Pro and SKP1000 are two powerful and big welcomed auto car key programmer in 2017,buy X-100 PAD2 Pro Key Programmer or buy SKP1000 Tablet Key Programmer,which better ? And today,this article will share a comparison between XTOOL X100 PAD2 Pro and SKP1000 SKP-1000 to help users better pick up right key programmer.

About XTOOL X100 X-100 PAD2 Pro Auto Key Programmer

XTOOL X100 X-100 PAD2 Pro Auto Key Programmer was updated from X100 PAD, with better performance and more powerful function.X100 PAD 2 Pro was portable but powerful,has a 8" LED Touch Screen,build in 4000mAh battery and you can charge by usb cable.X100 Tablet Key Programmer supports OBD-II engine diagnosis as well as 4 systems diagnosis-read & clear codes for engine,brakes,central Electrics ,Airbag,added with VW 4th & 5th IMM.

 About SKP1000 SKP-1000 Tablet Auto Key Programmer

SKP1000 is the newest introducted key programming in 2017.SKP-1000 Tablet Auto Key Programmer was handheld to take and has a good reputation in terms of features,performance,function as well as price. And SKP1000 Key Programmer was regarded as the must have scanner tool for all locksmiths.

 

XTOOL X100 PAD2 Pro vs SKP1000

1.Developed and supported by different team.
2. Used different PCB board.
3.SKP1000 supports one key online updating for both software and hardware and users will get one year freee online updating.
4.X1000 PAD2 Pro not only OBD-II engine diagnosis,but also supports 4 systems diagnosis-read & clear codes for engine,brakes,central Electrics ,Airbag,added with VW 4th & 5th IMM,while the SKP1000 only supports bod2 port diagnostic.
5.SKP1000 can support almost all cars in the world and Immo PINCODE reader for many vehicles and no need pincode when programming keys,while X100 PAD2 Pro supports multi cars,but not all.
6.SKP1000 Key Programmer is cheaper than X100 PAD2 Pro.
7.X100 PAD 2 Pro Key Programmer provides more functions .

So,for me, SKP1000 Tablet Key Programmer will be my number one choice,the SKP1000=SKP900+CI600 Plus,with appealling and new added features like one key online updating,almost all cars supported and price is decent affordable. But if you are looking for  a more professional and mulit-functions powerful key programmer and dont care much about price,then there is no wonder, X100 Key Programmer isright for you.

Buy KESS V2 5.017 or Buy FGTECH Galletto 4 V54,Which better ?

KESS 5.017 is the most popular ECU Flasher Tool in 2017,KESS V5.017 can support online 140+ vehicle list without tokens limited. KESS V2 5.017 is full activated version for bikes,cars,trucks and unlimited tokens for both software and hardware.KESS 5.017 China supports online and tested by many tuners,100% working.

While FGTECH Galletto 4 V54 is a cheap but popular ECU Chip tuning tool in the marketplace and it has launched for ages. FGTech Galletto 4-Master V54 adopted high-speed USB2 technology,supports Tricore function,esy to use and the system comes furnished complete with all Car, Truck, Motorbike, Marine, BDM MPCxx, checksum.

Then what's the best recommended automative tuning kit between these two diagnosticl tools ?Given to this question,this article will make a comparison between these two kits,hope it will be useful.

KESS V2 5.017 vs FGTECH Galletto V54

The Same

1.Read and write the data of Engine ECU.
2.Coverage World-wide famous brand cars.
3.Supported Multi Languages.
4.easy to use,100% working.

The Different

1.Version : Fgtech Galletto Software V54,firwmare V4,KESS V2 FW : 5.017,Software 2.23.
2.Galletto is for World-wide famous brand cars,trucks and motorcycles,kess v2 5.017 is for mainly for home cars.
3.Connection : 5.017 KESS V2 Master via obd2 port,FGTech Galletto 4 V54 both via BDM and OBD.
4.Tokens : Galletto V54 no tokens, KESS V2 FW5.017 with unlimited tokens.
5.Window System : galletto v54 only for Window 7 system, KESS 5.017 China for XP/WIN7/WIN8.
6.KESS 5.017 Ksuite 2.23 has anti mediation lock module,it can do new and encrypted cars better than Fgtech Galletto V54.

So,if you have to make a choice between these two diagnostic kits,i will strongly suggest you give KESS V2 5.017 Master Version a shot,as you known,the KESS 5.017 Master is one of the best recommended ECU Chip Tuning tool with amazing features. But if you are looking for a cheap but still workable tool,then galletto v54 will be your choice . To be honest,if your money is enought,you can buy KESS V2 5.017 +Fgtech Galletto V54 together to coverage more vehicle car list and the price was still affordable.

Online Where Buy Opcom OP-Com Firmware V1.7 2015/2016V ?

 Opel Opcom V1.7 has Updated to software 2017v already. And Currently, BUYOBDII is the first and only online store to provide 2017 newest Opel Opcom Firmware V1.7 2017v,see here : 2015/2016/2017v Opel OPCOM V1.70.If you are in the marketplace for this software,you can give BUYOBDII.com a shot.

 Newest Op-com FW 1.7 2016v Specification

• Firmware Version: V1.7
• Software version : 2015/2016/2017
• Car Models:For Opel car only 
• Languages:English Only 
• Functions:Diagnostic interface 
• Connection:By OBD2.
•  Computer requirements:XP or WIN7  

About 2016v Opel Opcom Updating

Our software don't work on FW1.45/1.59,if you want to update your opcom 1.64/1.70 to 2016V,you need pay us 25usd for update and you can contact our customer service here : http://www.buyobdii.com/ or from below address

E-mail:buyobd@gmail.com
Skype:Marshall.obd2
Whatsapp:86-13476108995

About 2015v Opel Opcom Installation and Activation

1 Once you get our tool,you need contact us,we will send you a software download link,download it.

2.Install software , connect opcom in usb with pc and open OP-COM_GetID.exe in installation folder and give me hwid number. We will send you code back,then works.You will check the software list update to newest now.
Note : Without license,it is still older software as before.

Buyer Guide On Best OBD2 Diagnostic Tool For Ford Cars By Far ?

As the title suggested,this article will mainly share a buyer guide on how to pick up a right Ford Diagnostic Tool For Ford users.And Ford VCM II and VXDIAG VCX NANO PRO are best recommended obd2 diagnostic tools,check the article to get more details.

About Ford VCM II Multi-Language Diagnostic Tool

Maybe as you know,Ford VCM II IDS VCM2 is a specially tool for Ford cars and was super hot and popular in the marketplace.VCM scanner is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS)vehicles and with many striking function like below

-Automatic vehicle recognition -Read & Clear Diagnostic Trouble Codes (DTCs)
-Live Data-stream with Recording & Playback Functions for Main ECUs -Guided Fault Finding
-New Software Re-flash for Existing ECUs
-Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.) -Program New Keys
-Injector Coding
-Set, Adjust or Remove Speed Governors -DPF Regeneration -Brake Bleeding
-Steering Angle Resets -All Other Dealer Functions

About VXDIAG VCX NANO 2 in1 For Ford IDS V101 Mazda V105

Ford VXDIAG VCX NANO is a 2in1 diagnostic tool for Ford IDS V101 Mazda V105 and there are two version avilable for Ford VXDIAG VCX NANO : Ford VXDIAG VCX NANO USB Version and Ford VXDIAG VCX NANO Pro With WIFI version.And VXDIAG VCX NANO will be used widely by car manufactures to make ECU online diagnosis and reprogramming,see confirmed function below

1.With 2in1 Function to support for Ford IDS V101/Mazda IDS V105.
2.Perfect replacement for Ford VCM 2
3.Support Multi-Languages: English/German/French/Italian/Spanish/Dutch/Slovenian/Finnish/Danish/ Norwegian/Portuguese(European)/Portuguese(Brazil)
 4.Update by CD with unlocked firmware
5.Support both new and old vehicles.  6.VXDIAG VCX NANO will be used widely by car manufactures to make ECU online diagnosis and reprogramming.  7.Supports the third party and OEM original diagnostic software

So,if you wanna buy a professional tool that specially for Ford,then buy wxdiag vcx nano for ford will be your choice.But if you wanna buy a tool with multi function that can be also work on mazda,then buy  VXDIAG VCX NANO 2 in 1 for ford.

Three Methods To Fix KESS V5.017 "Security Code Not Ready" Problems !

KESS V2 5.017 is a well known EUC Flasher Tool among tuners and KESS 5.017 also was regarded as one of the best ECU Chip Tuning diagnostic tool for bikes,cars,trucks without tokens limited and KESS FW5.017 was super hot in 2017.

Kess 5.017 China with original database and tested by many tuners,100% working,but sometimes,owning to the operation,you maybe will meet some problems like  "Security Code Not Ready"

Pls note : If you meet this problem, pls dont worry, the problem was mainly resulted from your operation,not KESS itself fault and about this problem, a customers kindly share his solution with all of users,and i also quotated here,hope it will be useful

See the original post i quotated from

"Method 1
 
I had this problem once after writing with empty battery.Kess v2 master says all ok,but after this,the car crank but not start. Cooling ventilator works.Helps to write the ecu in BDM mode.But first you need full 
BDM for it.My tuner have prepaired file for me to write it.After writing,I can read out it 
an make DPF off.

Method 2 : Change read speed to slow

If this does not work,leave ignition on position two for 30- 40 mins,They try to read ECU 
without tunring ignition off when Kess 5.017 ksuite  2.23 software  ask.

Method 3 : Connect and correctly choose driver
 
1.)Choose setup,in options IENTIFY ,READ,WRITE,RECOVER,SPECIAL and Setup
2.)Choose Speed, in 2 options PULL UP and Speed
3.)Select MINIMUM, in 2 options MINIMUM and MaxiMUM
Note these options do not appear to be sticky so you must do this for each attempt"

Where Buy VXDIAG VCX NANO PRO For American Vehicles,GM/Ford?

 VXDIAG VCX PRO is 2017 the most appealling auto diagnostic tool for GM/FORD/MAZDA/VW/HONDA/VOLVO/TOYOTA/JLR cars. And  VXDIAG VCX NANO PRO can allow tuners to diagnostic and programm three different car models from supported car list,inlcuded American vehicles at one time, the  VXDIAG VCX PRO has prebuild three different software,so VCX NANO PRO called VXDIAG VCX NANO PRO 3 in 1 as well.See VCX NANO PRO 3 in 1 Software Optional below

Just as you have seen, VCX NANO PRO by VXDIAG can support  American vehicles,GM and Ford basically programming by obd2 port and both our technology department as well as our customers have been confirmed,VCX PRO by VXDIAG by VXDIAG can 100% working,and can diagnose cars till 2017, it support online programming, one device support both Ford IDS and Mazda IDS.

Functions tested successfully:

1. Record and play back live data for ABS, PCM…tested ok
2. Program and Install new ECUs (PCM, ABS)…tested ok
3. Read and Clear DTCs…tested ok
4. Program New Keys for Mazda 6…tested ok
5. Set, adjust or remove speed governors…tested ok
6. DPF Regeneration…tested ok
7. Automatic vehicle recognition…tested ok
8. All other dealer functions…tested ok
9. Reset steering angle…tested ok
10. Find guided fault…tested ok
11. Injector Coding…tested ok

 For GM Vehicles

• Support PC-based diagnostics with rollout of the Global Diagnostic System GDS & GDS2
• Support GM TIS2WEB online Service Programming System (SPS) with your own G-M account.
• Support Tech2Win application to offering a larger screen with all of the Tech 2 tool functionality

So,if you are in the marketplace for a auto diagnostic tool for  American vehicles,GM and Ford,you can buy VXDIAG VCX NANO PRO,the price is cheap ,yet,the performance and function are appealling and according to the test, can 100% working on American vehicles,like GM and Ford.

Samtec Piwis Tester II,Top Diagnostic Tool For Porsche Recommended !

V18.10 Samtec Piwis Tester II was the latest Piwis Tester Diagnostic Tool Version for Porsche cars after year 2017. Samtec Piwis II was regarded as one of the best recommended diagnostic tool for Porsche and today,this article will give more details about Piwis Tester II V18.10 For Porsche to find top reasons to buy Samtec Piwis Tester II Diagnosis.

Samtec Piwis Tester II V18.10 Quick Look

Best Reasons to buy Samtec Porsche Piwis Tester II Diagnostic Tool

1.With Original Samtec Chip,supprot HW update

 2. with latest v18.10 firmware ,can support 2017 Porsche cars and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.

3.Multi Languages Supported : Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch.

4.Full access to porsche Development verison!

5.Bluetooth,GPS and Navigation Function are available. can modify in Engineer mode.

6. great quality with affordable price.

So,if you are in the marketplace for a programming tool for Porsche,then you can give Samtec Piwis Tester II a shot,it can work with almost all Porsche car models.

2017 SBB V46.02 Immobilizer Key Programmer Review !

New SBB V46.02 Key Programmer was released for sale and now 2017 New Key Programmer first batch has arrived and full in stock at buyobdii.com with best price and you can buy 2017 SBB V46.02 Immobilizer Key Programmer right here : Buy 2017 New SBB V46.02 Key Programmer. And today this article will share a hands on review about  SBB V46.02 Immobilizer Key Programmer to give you more details about SBB V46.02 Key Programmer.

About New SBB V46.02 Key Programmer

SBB V46.02 Key Programmer is a universal key programmer for programming multi brands car keys  in immobilizer,it was developed from SBB V33.02,but can support more newer car list and supports firmware updating and other improved features.See more : http://www.buyobdii.com/

SBB V46.02 First Images

2017 New SBB V46.02 Package Including

• 1 x SBB Main Unit
• 1 x OBD II cable    
• 1 x AC adapter    
• 1 x RS232 Cable    
• 1 x CD with user manuals+Update Software

2017 SBB V46.02 Immobilizer Key Programmer Pros

1.Add more newer cars such as Acura 2012,Chevrolet 2013,GMC 2013,Ford 2010 and Hummer.

2. support firmware update.

3.Multi-Languages:Italian/German/French /English /Spanish /Greek /Portuguese /Turkish /Russian supported.

4.Reading keys from immobilizers memory

5.Software with full database containing all the most important vehicle makes.

6.Operation by means of a menu guided programming

7.Cheap Affordable price

SBB V46.02 Key Programmer User Guide

Step 1 :  insert the blank new key into your car keyhole.
Step 2 :  running SBB key programmer.
Step 3 : Turn on ignition switch,then  insert SBB 16-pin interface into your car OBD2 diagnostic seat, then read out immobilizer pin code from immobilizer dump/EEPROM of the car before writing it into new blank key.
Note : When programming For Ford vehicle, it does not need pin code.
Step 4 : Follow the instructions showed on the SBB screen.

SBB V46.02 Immobilizer Key Programmer Thoughts & Opinions

As we have seen,it is easy to use SBB V46.02 and the features are appealling and it will be a useful key programmers for universal car models at decent price.

Where to buy ORI files for KESS V5.017 KESS 5.017 ?

KESS 5.017 Ksuite 2.23 was a super hot ECU Flasher Tool for programming vehicle's ECU Clip via obd2 port.KESS V2 5.017 also was one of the best recommended euc tuning tool in 2017 for its great peformance, powerful function,decent price and quality.

Maybe as you know, the KESS FW5.017 with reworked PCB,see pix show


The new NXP and SD car has included original oril files for kess 5.017 to allow you can read and write 140+ online vehicles without tokens limited. So if you are looking for ORI Files, you can directly buy a new 5.017 kess v2 mater version,as we have talked above, the KESS V2 5.017 Master Version has included original ori datebases and will be a useful tool for you when flashing your vehicles,because, KESS FW5.017 China has been tested by many users ,with a good reputation and KESS V5.017 Ksuite 2.23 is easy to use,you dont need disport your euc from car,you can read and write via obd2 port and 5.017 kesss v2 master supports online and you dont need to disconnect network when useing. In all, 2017 New KESS 5.017 is the full activated perfect version for bikes, cars, trucks.

KESS V5.017 Guide : How to Fix EDC15 Can't Read via OBD?

Following is a question asked by a users in forum,i quotated original post below

"Hi, can someone please tell me is there a way to read/write EDC15 ECU with OBD port? I have tryed but no success,Thanks ! "

And following is my answer,hope by answering this questions will help other users who maybe have same confusion.

To fix this problem,i will recommend users to buy KESS 5.017.Most time,some car list cant be read or cant be wrote,mainly resulted from car list cant  compatibility ,in this case,You need use a ECU flashing tool to read and write your car ECU chip to make a upgrade. So,here i suggested you can give KESS V2 FW5.017 a shot,for the time being,KESS V2 5.017 Master tool is the best selling EUC Tunning tool via obd2 port. KESS 5.017 Ksuite 2.23 can support online 140+protocol without tokens limited and 100% online working. Though the askers didnt give a detailed vehicle models,yet, below,i have list KESS FW5.017 supported list for EDC15

As you have seen, NEW 5.017 KESS V2 Master can support multi models,is the latest kess master tool as well as full activated version for bikes,cars,trucks unlimited tokens, by using this tool,you can fix some car list cant be read or write problem.

To use KESS V5.017 China,you just need download latest software 2.23 and installation and setup it,then connect your KESS 5.017 with your pc and obd2 port to allow kess v5.017 master version to read and write your EDC15 ECU Chip.The operation is easy,you can give it a shot and see whether your problems can be fixed or not.